Hi all,

I have been posting the LCB battery manual to quite a few OP’s and decided to scan the internet for batteries that seem to have the same front face characteristics.

I found a manul for the GITER 2.5 KwH battery and except for the name change in the document, the manuals are identical. I would appreciate any input on this.

19 days later
9 days later

RetiredDIY please also send me the manual minniejacques@yahoo.com . I have bought five and two of them don’t display voltage but if you test them they do show. The supplier also doesn’t come back to me and now I’m stuck with a client that isn’t happy. Thank you so much Jacques

      Hi JacquesMinnie

      This manual can be found on the website of any supplier that sells Giter batteries. As I pointed out earlier in this chain. The manual is identical.

      I trust this helps

        9 days later

        I also bought 1 battery (14.4kWh) and it also looks like it had very bumpy ride. Are these second hand? Anyway, would really appreciate if someone could please send me the manual at mypobox01@yahoo.com

          Hi. I Bought about 10 x LCB 7.2kW Battery’s over the last 3 months for me and some friends. I had 3 that failed. 2 with BMS failures and one that smoke came out off. I exchanged them Yesterday and bought another 3 battery’s but 2 the problems again with the BMS failure. All the battery’s looks like they came out of the war and they were freshly Painted. The whole exchange was very sketchy out of a storage facility.

          The ones that is working is working well but I am also struggling to get the communication to work with my Dye Inverters. I found a manual for a UFO battery that looks exactly the same but it didn’t help help me at all.

          Can you please include me in sending me the Manual please?

          banie.jacobsz@ymail.com

            TopProp Hi there would you please be so kind as to pass on the supllier info that you purchsed from ?

              Eric007 Hi there would you please be so kind as to pass on the supllier info that you purchsed from ?

                Also look at Leoch Batteries. The one I received looked exactly like the Leoch LFeLi-48100T battery. I used their manual. Working fine so far.

                  TopProp

                  Thnx, looks the same indeed. One thing: I was assured mine had CAN interface for communication and the manual for Leoch battery doesn’t mention it.

                  @ANUBIS: PM me at mypobox01@yahoo.com

                    I don’t mind sending the manual I found, but it doesn’t stop. I named the brand I googled so that it is easy to find the manual on the net.

                    I’ll even put the link here, just click on it. If it does not work, just google.

                    Leoch LFeLi-48100T Manual

                    Leoch LFeLi-48100T Specs

                    Hi all, my regrets - I cannot reply to all on this forum - it has become too wide spread. Please look at the following facebook entry https://www.facebook.com/VoltageTechElectrical/ and specifically to “BV9600E”

                    This shows the battery that this forum originally dealt with.

                    Notice that the battery BMS is NOT connected to the inverter since the protocol is unknown.

                    Also - see my reference to GITER and the reference to where the document exists.

                    As far as my own installation is concerned. It is working same as BV9600E and due to a time constraint have not been able to get the comms working.

                    Regards and thanks for the interest.

                    PS - Stay alert to scams and unscrupulous internet vendors. The name LCB is - it looks like - being used by these scamsters. AND - There is a LCB company name in the far east BUT they DO NOT make LiOn batteries.

                    7 days later

                    Hi all.

                    This is my first post but I did a lot of reading and checking to resolve my issue with the “LCB” 7.2kW battery which I purchased from Wholesale Solar. There was no manual and I cannot get any assistance from them - please avoid buying from them.

                    Today I managed to get my battery to communicate with my Axpert King inverter. The Giter manual (for a smaller battery) is exactly what I needed to get the setting on the battery right. I had to make my own comms cable as you need to connect pin 3 to 4 and 5 to 5 on the network cable, the rest is not required.

                    I will connect my PC tomorrow evening to do some changes but I am just super happy I finally got it to work.

                    You are welcome to contact me if you need assistance.

                    Regards

                      5 days later

                      Pieter504

                      Hey Pieter

                      I have 2 x LCB 6.5 kW batteries. I do have them working with my Sunpays Axpert 5Kva Inverter, but really would like to know that I have the closest to correct settings. Also I would like to set up some monitoring coms and would be interested to know how you have done it. My email address is wayne@lpt.co.za

                          Good Evening All

                          I myself recently bought the 7.2 LCB battery and want to found out if any one can please send met the manual as well. Just want to make sure all settings are correct. Currently my battery is only charging up to 3 bars and then it stops.

                          Kind Regards

                          A 100% free 🔋 forum powered with ❤️ &⚡ in